Main Article Content

Abstract

This paper presents a finite element model for idealisation of reinforced concrete hollow beams using 2D plane elements. The method of ensuring compatibility between the plates using two-dimensional model to analyze this type of structures is discussed. Cross-sectional distortion was minimised by incorporating end diaphragms in the FE model. Experimental results from eight reinforced concrete hollow beams are compared with the non-linear predictions produced by a 2D in-house FE program. The beam dimensions were 300x300 mm cross section with 200x200 mm hollow core and 3800 mm long. The beam ends were filled with concrete to form solid end diaphragms to prevent local distortion. The beams were subjected to combined bending, torsion and shear. It was found that the two-dimensional idealisation of hollow beams is adequate provided that compatibility of displacements between adjoining plates along the line of intersection is maintained and the cross-sectional distortion is reduced to minimum. The results from the 2D in-house finite element program showed a good agreement with experimental results.

 

Keywords

2D analysis Finite element method Hollow beams Bending Torsion Shear Combined load Numerical model

Article Details

How to Cite
Al-Nuaimi, A., & Bhatt, P. (2005). 2D Idealisation of Hollow Reinforced Concrete Beams Subjected to Combined Torsion, Bending and Shear. The Journal of Engineering Research [TJER], 2(1), 53–68. https://doi.org/10.24200/tjer.vol2iss1pp53-68

References

  1. Abdel-Kader, M.M.A., 1993, “Prediction of Shear Strength of Reinforced and Prestressed Concrete Beams by Finite Element Method,” Ph.D. Thesis, University of Glasgow.
  2. Alnuaimi, A.S., 1999, "Direct Design of Reinforced and Partially Prestressed Concrete Beams for Combined Torsion, Bending and Shear," Ph.D. thesis, University of Glasgow, UK.
  3. Alnuaimi, A.S., 2002, "Parametric Study on the Computational Behaviour of Hollow Beams Designed Using the Direct Design Method - Material Factors," Proceedings of High Performance Structures and Composites, Seville, Spain, WIT Press Publishers, March, pp. 605-614.
  4. Alnuaimi, A.S., 2003, "Parametric Study on the Computational Behaviour of Hollow Beams Designed Using the Direct Design Method - Numerical Factors," Proceedings of International Conference on Advances in Structures, ASSCCA'03, Sydney, Australia, A.A., 22-25 June, Balkema Publishers, Vol. 2, pp. 1017 - 1021.
  5. Bhatt P. and Abdelkader, M., 1995, "Prediction of Shear Strength of Reinforced Concrete Beams by Nonlinear Finite Element Analysis," Developments in Computational Techniques for Civil Engineering.
  6. CIVIL-COMP Press, Edinburgh, Scotland, UK. pp. 191-204.
  7. Bhatt, P. and Beshara, A.W., 1980, "In-plane Stresses in End Diaphragms of Box Girder Bridges," Journal of the Institution of Engineers (India), Part CV; Civil Engineering Division; Sep. Vol. 61, pp. 103-109.
  8. Chen, W.F. and Saleeb, A.F., 1994, “Constitutive Equations for Engineering Materials,” Elsevier Science B.V., Sara Burgerhartstraat 25, P.O. Box 211, 1000 AE Amesterdam, The Netherlands, p. 1129, ISBN: 0444884084.
  9. Darwin, D. and Pecknold, D. A., 1977, "Nonlinear Biaxial Stress-Strain Law for Concrete," J. of the Engineering Mechanics Division, ASCE, Vol. 103 (EM2), April, pp. 229-241.
  10. Kotsovos, M.D. and Pavlovic, M.N., 1995, “Structural Concrete,” Thomas Telford Publications. 1Heron Quay, London E14 4JD, UK, p. 550, ISBN: 0727720279.
  11. Kupfer, H. Hilsdorf, H.K. and Rusch, H., 1969, "Behaviour of Concrete Under Biaxial Stresses," ACI Journal, August, pp. 656-666.
  12. Liu T.C.Y., Nilson, A.H., and Slate, F.O., 1972, "Stress- Strain Response and Fracture of Concrete in Uniaxial and Biaxial Compression," ACI Journal, May, pp. 291- 295.
  13. MacGregor, J.G. and Ghoneim, M.G., 1995, "Design for Torsion," ACI Structural J, No. 92-S20, Mar.- Apr., pp. 211-218.
  14. Thurlimann, B., 1979, "Torsional Strength of Reinforced and Prestressed Concrete Beams-CEB Approach," Institut fur Baustatik und konstruktion, ETH. Zurich., No. 92. June, pp. 117-143.