Article Sidebar

Download
PDF
Statistic
Read Counter : 683 Download : 433

Downloads

Download data is not yet available.

Main Article Content

Abstract

Recycling as an economic disposal process for many hazardous waste materials has become a popular means of conserving our planet’s scarce and diminishing natural resources. This paper is a study of the influence of oil sludge (OS) on the physical behavior and performance of asphalt filled with heavy oil fly ash (HOFA), cement kiln dust (CKD) and limestone dust (LMD). Conventional asphalt consistency tests in addition to a new bond strength (BS) test were conducted on the modified asphalt mastics. The results were statistically analyzed and assessed in accordance with American Society for Testing and Materials (ASTM) D 332 and ASTM D 449 specifications. Too much OS resulted in strength deterioration of the asphalt mastic, which can be compensated for by filling the mastic with HOFA. OS interacts constructively with the fillers to improve their effectiveness in raising the softening point (SP) and viscosity of the asphalt, and also in reducing its penetration and ductility. Even though sludge mastics hold promise as suitable composites for damp proofing and waterproofing, the resulting low flash point (FP) and SP of some of these mastics make their suitability for roofing applications questionable.

 

Keywords

Oil sludge Oil fly ash Asphalt mastic Bond strength Waterproofing Roofing.

Article Details

How to Cite
Al-Abdul Wahhab, H., & Dalhat, M. (2014). Oil-Sludge Extended Asphalt Mastic Filled with Heavy Oil Fly Ash and Cement Waste for Waterproofing. The Journal of Engineering Research [TJER], 11(2), 27–38. https://doi.org/10.24200/tjer.vol11iss2pp27-38
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Al-Futaisi A, Ahmad J, Basma Y, Ramzi T (2007), Assessment of alternative management techniques of tank bottom petroleum sludge in Oman. Journal of Hazardous Materials 141:557-564.
  2. Al-Methel M, Al-Abdul Wahhab HI, Hussein IA (2011), Utilization of heavy oil fly ash to improve asphalt binder and asphalt concrete performance. Patent No. 8:062-413 B1.
  3. ASTM D5 / D5M (2013), Standard test method for penetration of bituminous materials. ASTM International, West Conshohocken, PA, DOI: 10.1520/D0005_D0005M-13.
  4. ASTM D36 / D36M (2012), Standard test method for softening point of bitumen (ringand- ball apparatus). ASTM International, West Conshohocken, PA, DOI:10.1520/D0036_D0036M-12.
  5. ASTM D92 (2012b), Standard test method for flash and fire points by cleveland open cup tester. ASTM International, West Conshohocken, PA, DOI: 10.1520/D0092- 12B.
  6. ASTM D113 (2007), Standard test method for ductility of bituminous materials. ASTM International, West Conshohocken, PA, DOI: 10.1520/D0113-07.
  7. ASTM D 312 (2000), Standard specification for asphalt used in roofing. ASTM International, West Conshohocken, PA, DOI: 10.1520/D0312-00R06.
  8. ASTM D 449 (2003), Standard specification for asphalt used in damp proofing and waterproofing. ASTM International, West Conshohocken, PA, DOI: 10.1520/D0449_D0449M.
  9. ASTM D 545 (2008), Standard test methods for preformed expansion joint filler for concrete construction. ASTM International, West Conshohocken, PA, DOI: 10.1520/D0545-08.
  10. ASTM D 4007 (2011), Standard test method for water and sediment in crude oil by the centrifuge method. ASTM International, West Conshohocken, PA, DOI 10.1520/D4007.
  11. ASTM D 4294 (2010), Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry. ASTM International, West Conshohocken, PA, DOI: 10.1520/D4294-10.
  12. ASTM D 6352 (2012), Standard test method for boiling range distribution of petroleum distillates in boiling range from 174 to 700°C by gas chromatography. ASTM International, West Conshohocken, PA, DOI: 10.1520/D6352-12.
  13. ASTM D 6481, (2010), Standard test method for determination of phosphorus, sulfur, calcium, and zinc in lubrication oils by energy dispersive X-ray fluorescence spectroscopy. ASTM International, West Conshohocken, PA, DOI: 10.1520/D6481- 99R10.
  14. Chen JS, Kuo PH, Lin PS, Huang CC, Lin KY (2008), Experimental and theoretical characterization of the engineering behavior of bitumen mixed with mineral filler. Materials and Structures 41:1015-1024.
  15. Eric PJ (2006), Asphalt mastic utilizing petroleum refinery waste solids. Patent No. US 7,025,822 B2.
  16. Fang C, Zhou S, Zhang M, Zhao S (2009), Modification of waterproofing asphalt by PVC packaging waste. Journal of Vinyl and Additive Technology 15(4):229-233.
  17. Finch G, Hubbs B, Bombino R (2010), Moisture transport by osmotic flow through waterproofing membranes – towards the development of osmosis resistant membranes. Proceedings of Buildings XI Conference, Clear Water, Florida, USA.
  18. Goikoetxeaundia G, Gonzalez O, Munoz ME, Pena JJ, Santamaria A (2007), Dynamic viscoelastic characterization of bitumen/polymer roofing membranes. Macromolecular Materials and Engineering 292: 715-722.
  19. Johansson LS, Isacsson U (1998), Effect of filler on low temperature physical hardening of bitumen. Construction and Building Materials. 12:463-470.
  20. Khan MJ, Al-Juhani AA, Ul-Hamid A, Shawabkeh R, Hussein IA (2011), Effect of chemical modification of oil fly ash and compatibilization on the rheological and morphological properties of low-density polyethylene composites. Journal of Applied Polymer Science 122:2486-2496.
  21. Lucke H (1989), Single polyurethane-modified bitumen composition. US Pat. No. 4795760.
  22. Martin-Alfonso MJ, Partal P, Navarro FJ, Garcia-Morales M, Gallegos C (2008a), Use of MDI-functionalized reactive polymer for the manufacture of modified bitumen with enhanced properties for roofing application. European Polymer Journal 44:1451-1461.
  23. Martin-Alfonso MJ, Partal P, Navarro FJ, Garcia-Morales M, Gallegos C (2008b), The role of water in the development of new isocyanate-based bituminous products. Industrial & Engineering Chemistry Research 47(18):6933-6940.
  24. Paul MM (2002), History of polymer modified and cold process roofing. (http://www.rcionline. org/interface/2002-11-mitchell.pdf).
  25. Recasens RM, Martinez A, Jimenez FP, Bianchetto H (2005), Effect of filler on the aging resistance of asphalt mixture. Journal of Transport Research Board 1901:10-17.
  26. Singh B, Gupta M, Tarannum H (2002), Mastic of polymer-modified bitumen and poly- (vinylchloride) wastes. Journal of Applied Polymer Science 90:1347-1356.
  27. Taha R, Ba-Omar M, Pillay AE, Roos G, Al- Hamdi A (2001), Recycling of petroleumcontaminated sand. Journal of Environmental Monitoring 3:417-420.
  28. Taha R, Hassan H, Al-Rawas A, Yaghi B, Al- Futaisi A, Jamrah A, Al-Suleimani Y (2007), Use of tank bottom sludge to construct and upgrade unpaved roads. Transportation Research Record: Journal of the Transportation Research Board 1989 208-214.
  29. Terry CE, Berard RA, Pinholster Jr, DF (1999), Polyurethane-modified bitumen coating composition. US Patent 5, 981,010.
  30. Veenstra JN, Sanders DA, Snethen DR (2000), Evaluation of road base material derived from tank bottom sludge. Integrated Petroleum Environmental Consortium (IPEC). World Asphalt (2010), Industry study with forecasts for 2013 & 2018. Freedonia Study, #2602.
  31. World Asphalt (2012), Industry market research for business leaders, strategists decision makers. Freedonia, SKU: FG6830349.