Article Sidebar

Download
PDF
Statistic
Read Counter : 746 Download : 470

Downloads

Download data is not yet available.

Main Article Content

Abstract

This paper introduces a new current-mode (CM) universal biquad filter structure with optimum number of active and passive elements. In the design, the proposed circuit uses a single active element namely, current follower trans-conductance amplifier (CFTA) and two grounded capacitors as passive elements. The main feature of the proposed circuit is that it can realize all five standard filtering functions such as low pass (LP), band pass (BP), high pass (HP), band stop (BS) and all pass (AP) responses across an explicit high impedance output terminal through the appropriate selection of three inputs. In addition, the same circuit is also capable to simultaneously realize three filtering functions (LP, BP and HP) by the use of single current input signal. Moreover, the proposed structure is suited for low voltage, low power operations and offers the feature of electronic tunability of pole-frequency and quality factor. Further to extend the utility of the proposed circuit block higher order current-mode filters are also realized through direct cascading. A detailed non-ideal and parasitic study is also included. The performance of the circuits has been examined using standard 0.25 μ m CMOS parameters from TSMC.

 

Keywords

Analog signal processing Biquad-filters Current-mode Tunable.

Article Details

How to Cite
Singh, S., Tomar, R., & Chauhan, D. (2016). Single CFTA Based Current-Mode Universal Biquad Filter. The Journal of Engineering Research [TJER], 13(2), 172–186. https://doi.org/10.24200/tjer.vol13iss2pp172-186
Download Citation
Endnote/Zotero/Mendeley (RIS)
BibTeX

References

  1. Arsian E, Metin B, Ciekoglu O (2006), Multiinput single-output cascadable current-mode universal filter topology with a single current conveyor. Third IASTED international Conference Circuits, Signals, and Systems 62-66.
  2. Bhusan M, Newcomb RW (1967), Grounding of capacitors in integrated circuits. Electronics Letters 3: 148-149.
  3. Biolek D, Biolkova V, Kolka Z (2009), Currentmode biquad employing CDTA. Indian Journal of Pure and Applied Physics 47: 535-537.
  4. Chaturvedi B, Maheshwari S (2011), Currentmode Biquad filter with minimum component count. Active and Passive Electronic Components: 1-7.
  5. Chang CM, Huang TH, Tu SH, Hou CL, Horng JW (2007), Universal active current filter using single second-generation current controlled conveyor. International Journal of Circuits, Systems and Signal Processing 1: 194- 198.
  6. Cicekoglu O (2001), Current-mode biquad with a minimum number of passive elements. IEEE Transaction on Circuits and Systems-II: Analog and Digital Signal Processing 48: 221- 222.
  7. Fabre A, Alami M (1995), Universal current mode biquad implemented from two second generation current conveyors. IEEE Transaction on Circuits and Systems-I: Fundamental Theory and Applications 42: 383- 385.
  8. Herencsar N, Koton J, Vrba K (2009), Single CCTA-based universal biquadratic filters employing minimum components. International Journal of Computer and Electrical Engineering 1: 307-310.
  9. Kacar F, Kuntman H (2010), New current-mode filters using single FDCCII with grounded resistor and capacitors. The Online Journal on Electronics and Electrical Engineering (OJEEE) 2(4): 341-345: Ref. no.-W10-0040.
  10. Kacar F, Kuntman H (2011), A new improved CMOS realization of CDTA and its filter applications. Turkish Journal of Electrical Engineering and Computer sciences 19(4): 631- 642.
  11. Kacar F, Yesil A, Kuntman H (2012), Currentmode biquad filters employing single FDCCII. Radioengineering Journal 21: 1269- 1278.
  12. Karybakas CA, Papazoglou CA (1999), Low sensitive CCII based biquadratic filters offering electronic frequency shifting. IEEE Transactions on circuits and Systems-II 46: 527- 539.
  13. Keskin AÜ, Biolek D, Hancioglu E, Biolkova V (2006), Current-mode KHN filter employing current differencing transconductance amplifiers. International Journal of Electronics and Communications 60: 443-446.
  14. Maheshwari S, Khan IA (2004), Novel cascadable current-mode translinear-C universal filter. Active Passive Electronic Component 27: 215-218.
  15. Maheshwari S, Khan IA (2005), High performance versatile translinear-C universal filter. Active and Passive Electronic Devices 1: 41-51.
  16. Mangkalakecree S, Duangmalai D, Siripruchyanun M (2009), Current-mode KHN filter using single CC-CCTA. In the Seventh PSU Engineering Conference: 306-309.
  17. Metin B (2007), Electronic tunability in currentmode filters. PhD Thesis.
  18. Minaei S, Türköz S (2004), Current-mode electronically tunable universal filter using only plus-type current controlled conveyors and grounded capacitors. ETRI Journal 26(4): 292-296.
  19. Pandey N, Paul SK (2011), VM and CM Universal filters based on single DVCCTA. Active and passive electronic components: 1-7.
  20. Prasad D, Bhaskar DR, Singh AK (2009), Universal current-mode biquad filter using dual output current differencing transconductance amplifier. International Journal of Electronics and Communication 63: 497-501.
  21. Prasad D, Bhaskar DR, Srivastava M (2013), Universal current-mode biquad filter using a VDTA. Journal of Circuits and Systems 4: 32-36.
  22. Prommee PP, Angkeaw K, Somdunyakanok M, Dejhan K (2009), CMOS- based near zerooffset multiple inputs max-min circuits and its applications. Analog Integrated Circuits and Signal Processing 61: 93-105.
  23. Satansup J, Tangsrirat W (2011), Single input five output electronically tunable currentmode biquad consisting of only ZC-CFTAs and grounded capacitors. Radioengineering 20: 273-280.
  24. Satansup J, Tangsrirat W (2012), Single VDTAbased current-mode electronically tunable multifunction filter. In proceedings of the ISEEC 2012: 266-272.
  25. Satansup J, Tangsrirat W (2014), Compact VDTA-based current-mode electronically tunable universal filters using grounded capacitors. Microelectronics Journal 45: 613- 618.
  26. Senani R, Singh VK, Singh AK, Bhaskar DR (2004), Novel electronically controllable current mode universal biquad filter. IEICE Electronics Express 1(14): 410-415.
  27. Singh B, Singh AK, Senani R (2012), New universal current-mode biquad using only three ZC-CFTAs. Radioengineering 21(1): 273- 280.
  28. Singh SV, Maheshwari S (2012), Currentprocessing current controlled universal biquad filter. Radioengineering 21 (1): 317-323.
  29. Singh SV, Tomar RS, Chauhan DS (2013), Single MO-CFTA based current-mode SITO biquad filter with electronic tuning. International Journal of Computer Science and Information Security (IJCSIS) 11(4): 77-81.
  30. Singh SV, Tomar RS, Chauhan DS (2014), Current tunable current-mode TISO biquad filter consisting of two MCFTAs and minimum number of grounded capacitors. In Proceedings of International Conference on Signal Processing and Integrated Networks (SPIN) 555-560.
  31. Sirirat J, Prasetsom D, Tangsrirat W (2010), High output impedance current-mode electronically tunable universal filter using single CFTA. In Proceedings of the ISCIT 2010 Tokyo 200-203.
  32. Tangsrirat W (2010), Novel current-mode and voltage-mode universal biquad filters using single CFTA. Indian Journal of Engineering & Material sciences 17: 99-104.
  33. Tangsrirat W (2011), Single input three output electronically tunable universal currentmode filter using current follower transconductance amplifiers. International Journal of Electronics and communication 65:783-787.
  34. Tomar RS, Singh SV, Chauhan DS (2014a), Cascadable low voltage operated currentmode universal biquad filter. WSEAS Transactions on Signal Processing 10: 345-353.
  35. Tomar RS, Singh SV, Chauhan C (2014b), Fully integrated electronically tunable universal biquad filter operating in current-mode. In proceedings of International Conference on Signal Processing and Integrated Networks (SPIN), 549-554.
  36. Toumazou C, Lidgey FJ, Haigh DG (1990), Analogue ICs design: the current-mode approach. Peter Peregrinus, London, UK: Chapter 13.
  37. Wang HY, Lee CT (2001), Versatile insensitive current mode universal biquads using current conveyors. IEEE Transaction on Circuits and Systems-II: Analog and Digital Signal Processing, 48: 409-413.
  38. Yuce E, Metin B, Cicekoglu O (2004), Currentmode Biquadretic filters using single CCII and minimum number of passive elements. Frequenz: Journal of RF-Engineering and Telecommunication 58: 225-227.