Main Article Content

Abstract

 The wind tunnel test is one important way to obtain the aerodynamic derivatives of aircrafts. These derivatives are necessary when the guidance and control systems of the aircraft are designed and when the dynamic quality of the aircraft is analyzed as well. The results of experiments of the static derivatives and dynamic derivatives of the aircraft in low-speed wind tunnels have revealed that there are some unavoidable drawbacks such as the interference of the streamline flow brought about by the strut in the traditional strut suspension system. A cable-mounted system is very suitable for experiments of the static derivatives of an aircraft, but it cannot be used in the experiments of dynamic derivatives. In order to use the same wire-driven parallel suspension system to realize the static and dynamic derivates experiments in low-speed wind tunnels, a survey of the research work addressed within the Wire-Driven Parallel Suspension Systems (WDPSS-8) project is presented in this paper. The results show that WDPSS-8 can be successfully used in experiments of static derivatives, and that it has potentiality to be used in experiments of dynamic derivatives. In the issues in the theoretical aspect the issues have been handled. However, much work should be done in the experimental aspects. The research outcomes of WDPSS-8 will help the Chinese set up Chinese brands in the field of wind tunnel tests of aircrafts.

 

Keywords

Wind tunnel Suspension system Wire-driven Static and dynamic derivatives

Article Details

How to Cite
Zheng, Y., Lin, Q., Liu, X., & Mitrouchev, P. (2010). Preliminary Step Towards Wire-Driven Parallel Suspension Systems for Static and Dynamic Derivatives of the Aircraft in Low-Speed Wind Tunnels. The Journal of Engineering Research [TJER], 7(1), 22–30. https://doi.org/10.24200/tjer.vol7iss1pp22-30

References

  1. Bennett, R.M., Farmer, M.G., Mohr, R.L., et al, 1978, "Wind-Tunnel Technique for Determining Stability Derivatives from Cable-Mounted Models," Journal of Aircraft, Vol. 15(5), pp. 304-310.
  2. Bernhardt, J.E., Williams, D.R., 2000, "Close-Loop Control of Forebody Flow Asymmetry," Journal of Aircraft, Vol. 37(3), pp. 491-498.
  3. Bian, Y.Z., Li, X.R., Li, L., et al, 1999, "Development of Model Cable Mount and Strain Gauge Balance Measuring System in Low Speed Closed Wind Tunnel," Experiments and Measurements in Fluid Mechanics, Vol.13(3), pp. 85-90, [in Chinese].
  4. Cao, Y.H. and Deng, X.Y., 1998, "Experimental Study of Aircraft Fuselage Aerodynamic Forces at High Attack Angle," Acta Aerodynamica Sinica, Vol. 16(4), pp. 394-399, [in Chinese].
  5. Du, X.Q., Wang, X.J. and Zhou, Y., 2003, "Investigation of Support Interference in Low Speed Wind Tunnel Oscillation Tests," Experiments and Measurements in Fluid Mechanics, Vol.17,No.2,pp.37-40, [in Chinese].
  6. Griffin, S.A., 1991, "Vane Support System (VSS), A New Generation Wind Tunnel Model Support System," AIAA91-0398. http://www.onera.fr/dcsd/sacso/index.php.
  7. Hu, L., 2008, "Research on Wire-Driven Parallel Suspension Systems for Low-Speed Wind Tunnels", Master's Thesis.
  8. Quanzhou: Huaqiao University, October 2008. [in Chinese].
  9. Lafourcade, P., Llibre, M., Reboulet, C., 2002, "Design of a Parallel Wire-Driven Manipulator for Wind Tunnels," Proceedings of the Workshop on Fundamental Issues and Future Directions for Parallel Mechanisms and Manipulators,Quebec City, Quebec, pp. 187-194.
  10. Liang, B., Zheng, Y.Q. and Lin, Q., 2007, "Attitude Control of the Scale Model of Wire-Driven Parallel Suspension. Systems for Low-Speed Wind Tunnels," Forum on Key Technique of Large Aircraft and Academic Annual Meeting of Chinese Society of Aeronautics and Astronautics in 2007, Shenzhen, China.
  11. Lin, Q., Liang, B. and Zheng, Y.Q., 2008, "Control Study on Mmodel Aattitude and Oscillation by Wire-Driven Parallel Manipulator Support System for Low-Speed Wind Tunnel," Journal of Experiments in Fluid Mechanics, Vol.22(3), pp. 75-79, [in Chinese].
  12. Lin, Q., Zheng, Y.Q. and Liu, X.W., 2006, "Modeling and Control of a Wire-Driven Parallel Support System with Large Attack Angles in Low Speed Wind Tunnels," CD Proceedings of 25th Congress of the International Council of the Aeronautical Sciences, Hamburg, Germany.
  13. Liu, T.F., Gao, F.X. and Lv, W., 2001, "Mechanical Property Calculation of Wire-Support Structure in Wind Tunnel Experiment," Mechanics in Engineering, Vol. 23(1), pp. 46-48, [in Chinese].
  14. Liu, X.W., Q.Y., Agyemang, B.B., Zheng, Y.Q. and Lin, Q.,2006, "Design of a Wire-Driven Parallel Suspension System for Wind Tunnel based Virtual Flight Testing," Proceedings of the 7th International Conference on Frontiers of Design and Manufacturing, Guangzhou, China.
  15. Liu, X.W., Zheng, Y.Q. and Lin Q., 2004, "Overview of Eire-Driven Parallel Manipulators for Aircraft Wind Tunnels," Acta Aeronautica Et Astronautica Sinica, Vol. 25(4), pp. 393-400, [in Chinese].
  16. Roos, F.W., 2001, "Micro Blowing for High-angle-ofattack Vortex Flow Control on Fighter Aircraft," Journal of Aircraft, Vol. 38(3), pp. 454-457.
  17. Shen, L.M., Shen, Z.H. and Huang, Y., 1988, "A Wire Type-support System for High Angle of Attack Test in Lw Speed Wind Tunnel," Experiments and Measurements in Fluid Mechanics, Vol. 12(4), pp. 15- 22, [in Chinese].
  18. Sun, H.S., 1999, "The Development of 96-test System for Measuring Dynamic Derivatives at High Angle of Attack," Journal of Experiments in Fluid Mechanics, Vol. 13(1), pp. 31-37, [in Chinese].
  19. Wang, Y.K., Huang, T. and Deng, X.Y., 2004, "The Study of Aerodynamic Characteristics of after body and effect of Cable-Mounting," Chinese Journal of Theoretical Applied Mechanics, Vol. 36(3), pp. 257- 264, [in Chinese].
  20. Zhang, R.P., Wang, X.N. and Li, Z.X., et al. 2006, "Investigation of Sting Support Interference in Low Speed Wind Tunnel," Journal of Experiments in Fluid Mechanics, Vol.20(3), pp. 33-38, [in Chinese].
  21. Zheng, Y.Q., Lin, Q. and Liu, X.W., 2007, "Initial Test of a Wire-Driven Parallel Suspension System for Low Speed Wind Tunnels," In: Proceedings of the 12th World Congress in Mechanism and Machine Science, Besancon, France, June 17-21, 2007, Vol. 5, pp. 88- 93.
  22. Zheng, Y.Q., Lin, Q. and Liu, X.W., 2005, "Design Methodology of Wire-Driven Parallel Support Systems in the Low Speed Wind Tunnels and Attitude Control Scheme of the Scale Model," Acta Aeronautica Et Astronautica Sinica, Vol. 26(6), pp. 774-778, [in Chinese].
  23. Zheng, Y.Q., 2004, "Research on Key Theoretical Issues of Wire-Driven Parallel Kinematic Manipulators and the Application to Wind Tunnel Support Systems," PhD Dissertation, Quanzhou:Huaqiao University, pp. 4-104, [in Chinese].
  24. Zheng, Y.Q., 2006, "Feedback Linearization Control of a Wire-Driven Parallel Support System in Wind Tunnels," Proceedings of Sixth International Conference on Intelligent System Design and Applications, Jinan, Shandong, China.
  25. Zheng, Y.Q., Lin, Q. and Liu, X.W., 2006, "Kinematic Calibration of a Wire-Driven Parallel Support System in Wind Tunnels," China Mechanical Engineering, Vol.17(6), pp. 551-554.